The output of a sand washer is measured not by the number of units but by processing capacity in t/h. The three Chentai series—CTBD Chain Sand Washer, CTLX Spiral Sand Washer, and CTLD Wheeled Sand Washer—cover 20–350 t/h, while the supporting Sand Making Tower System handles 100–500 tons per hour in a single system. Below are the upper and lower parameter limits for all available models in the three sand washer series, along with guidance on reverse-engineering equipment specifications from target output.
Parameter Comparison of the Three Sand Washer Series
| Model Series | Model | Feed Size | Power | Processing Capacity |
|---|---|---|---|---|
| CTBD | Chain Bucket Sand Washer | 30 mm | — | 60–300 t/h |
| CTLX | Spiral Sand Washer | 10 mm | 15–30 kW | 60–250 t/h |
| CTLD | Wheeled Sand Washer | 10 mm | 5.5–22 kW | 20–350 t/h |
The data represents the upper and lower limits of all available models in each series. Test conditions: material with an average specific gravity of 2.7 t/m³.
How to Reverse-Engineer Specifications Based on Target Output
- First, determine the output tier: common manufactured sand output tiers are 100 t/h, 200 t/h, 300 t/h, and 500 t/h.
- Allow a 10–15% margin when selecting equipment — actual output will be significantly below the rated value when clay content is high.
- The Sand Making Tower System is configured for 100–500 tons per hour in a single system, covering complete-line requirements from 100 t/h to 500 t/h.
- For dewatering, equip the process with a CTTS Dewatering Screen or CTYK Circular Vibrating Screen to promptly dewater and classify the washed sand.
Related Models:CTBD Chain Bucket Sand Washer、CTLX Spiral Sand Washer、CTLD Wheeled Sand Washer、CTTS Dewatering Screen
Related Categories:Washing Equipment · Sand Making Tower System
