The wheeled sand washer manufactured by Chentai Equipment uses an impeller drive device and a gearbox drive system, and the continuous rotation of the wheel buckets stirs, washes and lifts the sand. The machine is equipped with a high pressure flushing system and a fine sand recovery device, which keeps the washing efficiency while effectively limiting fine sand losses and improving the economic benefit.
Overview
The CTLD wheeled sand washer uses an impeller transmission and reducer drive to mix, clean and lift sand through the rotation of the wheel bucket. A high-pressure flushing system and a fine sand recovery device limit the loss of fine sand while the material is cleaned. The tank is built from thickened steel plate, and a circulating water system with an intelligent water replenishment device recycles the cleaning water, which reduces water consumption by 30% compared with traditional equipment. A sealing structure and an overflow weir plate complete the washing and classification arrangement.
Product Features
- Reliable drive sealing — An external sealing structure and a fully enclosed transmission keep maintenance requirements low.
- Effective drainage — The drainage groove design removes moisture from the material during discharge.
- Controlled classification — A guide plate and an adjustable long overflow weir plate, matched to the spiral speed, set how the material is washed and graded.
- Wear-resistant parts — The spiral blades are made of anti-wear material and specially treated to keep the machine running continuously.
- Fine sand recovery — The recovery device and flushing system hold back fine sand during washing, which limits product loss.
Basic Parameter Table
MODEL · CTLD| Model | Feed size (mm) | Impeller width (mm) | Impeller diameter (mm) | Power (KW) | Capacity (t/h) |
|---|---|---|---|---|---|
| CTLD1808 | ≤10 | 800 | 1800 | 5.5 | 20-40 |
| CTLD2512 | ≤10 | 1200 | 2500 | 11 | 40-80 |
| CTLD3016 | ≤10 | 1600 | 3000 | 15 | 80-120 |
| CTLD3020 | ≤10 | 2000 | 3000 | 15 | 120-180 |
| CTLD4020 | ≤10 | 2000 | 4000 | 18.5 | 150-250 |
| CTLD4025 | ≤10 | 2500 | 4000 | 22 | 200-350 |
or WeChat chentai202605 · +86-570-8885527
Applications
The CTLD wheeled sand washer cleans sand with a rotating wheel bucket while recovering the fine fraction that would otherwise leave with the waste water. Typical duties include:
- Washing of manufactured sand with recovery of fines
- Washing and grading of sand and gravel in aggregate plants
- Applications where water consumption needs to be kept down through recycling
- Jobs where washed sand must meet a specified cleanliness requirement
The washer works as the washing stage of a line: material is mixed, cleaned and lifted by the wheel bucket, water is recirculated by the circulating water system, and the washed product goes on to screening or stockpiling. The fine sand recovery device keeps the fine fraction in the product rather than in the discharge water.
How to Choose the Right CTLD Model
Three factors decide which CTLD model fits your operation:
- Required output — match your tonnage against the “Capacity (t/h)” column: CTLD1808 covers 20–40 t/h, CTLD3016 covers 80–120 t/h, and CTLD4025 covers 200–350 t/h.
- Feed size — all models in the table are listed with a feed size of ≤10 mm, so the washer takes already-screened sand rather than lump material.
- Impeller size and power — impeller width runs from 800 mm (CTLD1808) to 2500 mm (CTLD4025) and impeller diameter from 1800 mm to 4000 mm, with motor power from 5.5 kW to 22 kW.
Tell us your required tonnage and the moisture or cleanliness target and we will confirm the model.
Operation & Maintenance Tips
- Check the underwater sealing structure and the external seal during scheduled maintenance — these keep the transmission protected while the impeller runs below water level.
- Adjust the overflow weir plate when the classification requirement changes; its length is part of how the washing and grading result is set.
- Inspect the anti-wear spiral blades for wear and replace them before the washing efficiency drops; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.
CTLD Wheeled Sand Washer FAQ
Which CTLD model do I need for about 80 t/h?
According to the “Capacity (t/h)” column, CTLD2512 (40–80 t/h) and CTLD3016 (80–120 t/h) both cover 80 t/h. The actual output depends on how dirty the feed is and on the washing requirement.
How much water does it use?
The machine uses a circulating water system with an intelligent water replenishment device, which recycles the cleaning water and reduces water consumption by 30% compared with traditional equipment.
What happens to the fine sand during washing?
The fine sand recovery device, working with the high-pressure flushing system, holds back the fine fraction so it stays in the product instead of being lost with the waste water.
What feed size does it take?
All models in the table are listed with a feed size of ≤10 mm; material should be screened to that size before washing.
Product Gallery
Product photos of CTLD Wheeled Sand Washer from our catalogue.



Other Models in the Same Series
Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.
CTBDWashing EquipmentChain Sand Washer
Chain Sand Washer
The chain sand washer manufactured by Chentai Equipment is a machine that uses continuously rotating buckets to excavate, lift and wash sand and gravel from underwater.
- Bucket rotation cycle
- High lifting height
- Underwater excavation
CTLXWashing EquipmentSpiral Sand Washer
Spiral Sand Washer
The CTLX series spiral sand washers manufactured by Chentai Equipment are efficient units for desliming, sand washing and gravel washing, widely used …
- Optimized design
- Low maintenance cost
- High washing efficiency




