The CTLX series spiral sand washers manufactured by Chentai Equipment are efficient units for desliming, sand washing and gravel washing, widely used for washing, grading and impurity removal of sand and gravel aggregates in the road, railway, construction, building materials and hydropower industries. The series is divided into single screw and double screw structures according to the washing throughput, and into light and heavy types according to the size of the material to be washed.
Overview
The CTLX series spiral sand washer is used for desliming, sand washing and stone washing of sand and gravel aggregates in highways, railways, construction, building materials and hydropower projects. The series comes as a single spiral or double spiral depending on the volume to be washed, and in light-duty or heavy-duty versions depending on particle size: light-duty machines wash fine material below 10 mm, heavy-duty machines wash coarse material of 10–80 mm.
Product Features
- Thorough cleaning — The spiral stirs and lifts the material so sand and gravel roll and rub against each other in the water, removing surface soil and impurities.
- Simple structure — Motor, reducer, water tank and spiral form the machine, which keeps installation and maintenance straightforward.
- Continuous capacity — The spiral cleans and lifts material continuously, so the washer keeps up with larger feed volumes.
- Range of materials — The configuration can be adjusted for different sand and gravel types, particle sizes and output requirements, including river sand, sea sand and machine-made sand.
- Modest water and power use — Operation consumes relatively little energy and produces waste water and residue that are straightforward to handle and recycle.
Basic Parameter Table
MODEL · CTLX| Model | Feed size (mm) | Tank length (mm) | Spiral diameter (mm) | Power (KW) | Capacity (t/h) |
|---|---|---|---|---|---|
| CTLX1270 | ≤10 | 7000 | 1200 | 15 | 60-80 |
| CTLX1580 | ≤10 | 8000 | 1500 | 22 | 80-120 |
| CTLX1880 | ≤10 | 8000 | 1800 | 30 | 120-150 |
| 2CTLX1270 | ≤10 | 7000 | 1200*2 | 15*2 | 100-150 |
| 2CTLX1580 | ≤10 | 8000 | 1500*2 | 22*2 | 150-200 |
| 2CTLX1880 | ≤10 | 8000 | 1800*2 | 30*2 | 180-250 |
or WeChat chentai202605 · +86-570-8885527
Applications
The CTLX spiral sand washer removes soil, clay and other impurities from sand and gravel by stirring the material in water and lifting it out with the spiral. Typical duties include:
- Washing and grading aggregate for highway and railway projects
- Sand washing for construction and building materials plants
- Desliming of sand and gravel in hydropower project supply
- Cleaning of river sand, sea sand and machine-made sand
The washer is normally installed as a washing stage before screening: material is cleaned and lifted by the spiral, then discharged for grading. Light-duty machines handle fine material below 10 mm while heavy-duty machines handle 10–80 mm, and single- or double-spiral configurations are selected to match the volume to be washed.
How to Choose the Right CTLX Model
Three factors decide which CTLX model fits your operation:
- Feed size — the “Feed size (mm)” column lists ≤10 mm for every model in the table; for coarser material in the 10–80 mm range, the heavy-duty version of the series is used.
- Required output — match your tonnage against the “Capacity (t/h)” column: CTLX1270 covers 60–80 t/h, CTLX1880 covers 120–150 t/h, and 2CTLX1880 covers 180–250 t/h.
- Spiral configuration — single-spiral models (CTLX1270, CTLX1580, CTLX1880) and double-spiral models (2CTLX…) share the same tank lengths of 7000–8000 mm; spiral diameter runs from 1200 mm to 1800 mm and power from 15 kW to 30*2 kW.
Choose single spiral for lower volumes and double spiral when the tonnage or the washing duty requires two spirals in the same tank.
Operation & Maintenance Tips
- Keep the water level in the tank matched to the material being washed — the cleaning action depends on the material rolling and rubbing in the water.
- Check the spiral, reducer and drive for wear and unusual noise during operation; the spiral is the part in continuous contact with the material.
- Run the washer within the feed size listed for the model so the washing and grading result stays consistent; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.
CTLX Spiral Sand Washer FAQ
Which CTLX model do I need for about 120 t/h?
According to the “Capacity (t/h)” column, CTLX1580 (80–120 t/h) and CTLX1880 (120–150 t/h) both cover 120 t/h. The actual output depends on how dirty the feed is and on the washing duty.
What feed size can the washer handle?
All models in the table are listed with a feed size of ≤10 mm. For fine material below 10 mm the light-duty version is used, and for coarse material of 10–80 mm the heavy-duty version.
What is the difference between single and double spiral?
The single-spiral models (CTLX1270, CTLX1580, CTLX1880) use one spiral; the double-spiral models (2CTLX1270, 2CTLX1580, 2CTLX1880) use two, with correspondingly higher capacity — 180–250 t/h for 2CTLX1880 against 120–150 t/h for CTLX1880.
Which materials can be washed?
The washer is suitable for river sand, sea sand and machine-made sand, and the configuration can be adjusted for different sand and gravel types, particle sizes and output requirements.
Product Gallery
Product photos of CTLX Spiral Sand Washer from our catalogue.



Other Models in the Same Series
Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.
CTBDWashing EquipmentChain Sand Washer
Chain Sand Washer
The chain sand washer manufactured by Chentai Equipment is a machine that uses continuously rotating buckets to excavate, lift and wash sand and gravel from underwater.
- Bucket rotation cycle
- High lifting height
- Underwater excavation
CTLDWashing EquipmentWheeled Sand Washer
Wheeled Sand Washer
The wheeled sand washer manufactured by Chentai Equipment uses an impeller drive device and a gearbox drive system, and the continuous rotation of the…
- High washing cleanliness, quality sand
- Low fine sand loss, high recovery
- Low water consumption, energy saving




