Chain Sand Washer CTBD: Bucket rotation cycle

Washing Equipment · Bucket rotation cycle · High lifting height

CTBD Chain Sand Washer

The chain sand washer manufactured by Chentai Equipment is a machine that uses continuously rotating buckets to excavate, lift and wash sand and gravel from underwater. It is commonly used in sand mining, river dredging and mineral processing such as gold panning.

CTBD

CTBD · Selection & Quotation

Tell us the material hardness, feed size and target output, and Chentai Equipment engineers will match the machine to the complete line process and provide the selection parameters and quotation.

Mining companies served 200+, product exports 20+ countries and regions, granted technology patents 90+ patents.

Three Key Selection Factors

  • Bucket rotation cycle
  • High lifting height
  • Underwater excavation
Max feed size30 mm
Capacity60-300 t/h
PowerDetermined by working conditions
Category:

The chain sand washer manufactured by Chentai Equipment is a machine that uses continuously rotating buckets to excavate, lift and wash sand and gravel from underwater. It is commonly used in sand mining, river dredging and mineral processing such as gold panning.

Overview

The CTBD chain bucket sand washer uses a circularly rotating chain bucket to excavate, lift and clean sand and gravel from underwater. It is commonly used in sand mining, river dredging and mineral processing operations such as gold panning, where material must be dug from the bottom, washed and delivered to the next stage in one continuous pass.

Working Principle

Rows of buckets are fixed to the chains and rotate continuously with the transmission device. The bucket at the bottom digs out the sand and gravel and completes the washing action, then the chain lifts it to the top where it is dumped for the next process, such as screening. The bottom buckets carry drainage holes to let water escape during lifting and are fitted with replaceable blades for wear resistance.

Product Features

  • Continuous digging, washing and lifting in a single chain-bucket cycle
  • Drainage holes in the bottom buckets let water drain as the material is lifted
  • Replaceable blades on the digging buckets restore performance as they wear
  • The washed material is dumped at the top for the next process, such as screening

Basic Parameter Table

MODEL · CTBD
Model Tank width (mm) Max feed size (mm) Installation angle (°) Running speed (m/s) Capacity (t/h)
CTBD600 600 30 30-65 0-0.25 60-100
CTBD800 800 30 30-65 0-0.25 100-150
CTBD1000 1000 30 30-65 0-0.25 150-200
CTBD1200 1200 30 30-65 0-0.25 200-300
Need a quotation for this model?Send us the material hardness, feed size and target capacity, and we will propose the model and a quotation.

or WeChat chentai202605 · +86-570-8885527

Applications

The CTBD chain bucket sand washer is used wherever sand and gravel must be recovered from under water and cleaned at the same time. Typical duties include:

  • Sand mining operations digging material from a pit or deposit
  • River and waterway dredging
  • Mineral processing duties such as gold panning
  • Washing of sand and gravel ahead of the screening stage

Material is dug, washed and lifted by the same machine and then dumped for the next process, typically screening, where the washed product is graded before use. The installation angle of 30–65° and a running speed of 0–0.25 m/s let the machine be set for the depth of the pit or water body it works in.

How to Choose the Right CTBD Model

Three factors decide which CTBD model fits your operation:

  1. Required output — match your tonnage against the “Capacity (t/h)” column: CTBD600 covers 60–100 t/h, CTBD1000 covers 150–200 t/h, and CTBD1200 covers 200–300 t/h.
  2. Feed size — all four models are listed with a max feed size of 30 mm, so material coarser than that should be reduced or screened before washing.
  3. Tank width — tank width runs from 600 mm (CTBD600) through 800 mm and 1000 mm to 1200 mm (CTBD1200), and is the dimension that sets how much material the buckets can carry per pass.

Installation angle (30–65°) and running speed (0–0.25 m/s) are the same across the range, so the selection comes down to required tonnage and tank width.

Operation & Maintenance Tips

  • Keep the drainage holes in the bottom buckets clear so water can escape while the buckets lift; blocked holes carry water into the discharge.
  • Check the replaceable blades on the digging buckets regularly and replace them before wear affects digging and washing performance.
  • Inspect the chain and bucket rows for wear and alignment during scheduled stoppages; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.

CTBD Chain Sand Washer FAQ

Which CTBD model do I need for about 200 t/h?

According to the “Capacity (t/h)” column, CTBD1000 (150–200 t/h) and CTBD1200 (200–300 t/h) both cover 200 t/h. The actual output depends on the material and how it is fed.

What feed size can it handle?

All models in the table are listed with a max feed size of 30 mm. The washer is designed for sand and gravel, not for lump material.

What happens to the material after washing?

The buckets lift the material to the top and dump it for the next process — typically screening, where the washed product is graded before use.

How is wear handled on the digging buckets?

The bottom buckets are fitted with replaceable blades, so worn blades can be exchanged instead of replacing the bucket. The drainage holes should be kept clear at the same time.

PRODUCT GALLERY

Product Gallery

Product photos of CTBD Chain Sand Washer from our catalogue.

CTBD Chain Sand Washer
CTBD Chain Sand Washer
CTBD Chain Sand Washer
CTBD Chain Sand Washer
CTBD Chain Sand Washer
CTBD Chain Sand Washer
SELECTION SUPPORT

Not sure which model to choose?

Tell us the material hardness, feed size, target output and finished product specification, and Chentai engineers will match the complete line process solution and provide selection parameters and a quotation.

Consultation Hotline

+86 133 6202 3713

Zhejiang Chentai Intelligent Equipment Co., Ltd.

Get a Selection Proposal

Quality Builds the Enterprise Service Reaches Far

Vision Building a Benchmark for Industry Quality Create industry quality benchmarks

Mission Committed to green development of mines and continued success for customers Committed to the green development of mines and continuous customer success

We Look Forward to Working With You

The company is committed to continuous product improvement. If appearance details change, please refer to the actual product.

+86 133 6202 3713 +86-570-8885527 equipmentchentai@gmail.com WhatsApp +86 133 6202 3713