The single stage heavy hammer crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, integrates coarse crushing, fine crushing and shaping in one machine. It uses high speed hammer impact to break the material, with a large crushing ratio and high capacity, and is widely used for crushing limestone, construction waste and similar materials.
Overview
The CTPDF series single-stage heavy hammer crusher reduces large raw stone to the required size in one crushing stage. Because one machine replaces a multi-stage arrangement, the process is simpler and both investment and operating cost stay lower. It is suited to limestone and other materials of medium-low hardness.
Product Features
- Single-stage crushing from large raw stone to finished size, which simplifies the flowsheet
- Low investment and operating cost for the crushing stage
- Wear-resistant hammers with long service life
- Uniform finished product
Basic Parameters
MODEL · CTPD| Model | Feed Size Feed size(mm) |
Power (KW) Power (KW) |
Speed (rpm) Speed (rpm) |
Capacity (t/h) Capacity(t/h) |
|---|---|---|---|---|
| CTPDF1616 | ≤700 | 250 | 420 | 250-300 |
| CTPDF2016 | ≤700 | 355 | 420 | 300-400 |
| CTPDF2416 | ≤700 | 400 | 420 | 350-500 |
| CTPDF2018 | ≤800 | 500 | 350 | 450-600 |
| CTPDF2418 | ≤900 | 560 | 350 | 550-700 |
| CTPDF2420 | ≤1000 | 800 | 350 | 800-1000 |
| CTPDF2620 | ≤1100 | 1000 | 350 | 1000-1300 |
| CTPDF2624 | ≤1200 | 1400 | 350 | 1500-2000 |
or WeChat chentai202605 · +86-570-8885527
Applications
The CTPDF single-stage heavy hammer crusher takes run-of-mine stone and produces finished size in one pass, so it is used where a short flowsheet is wanted. Typical duties include:
- Limestone crushing in a single stage
- Quarrying of materials of medium-low hardness
- Lines that want to replace a two-stage crushing arrangement with one machine
- High-tonnage duties, from 250–300 t/h on CTPDF1616 up to 1500–2000 t/h on CTPDF2624
Because the machine does the work of primary and secondary crushing together, the line around it is short: a feeder supplies the raw stone and screening follows the crusher to separate the finished product. Model selection starts with the largest lump in the feed, since the table lists feed sizes from ≤700 mm up to ≤1200 mm.
How to Choose the Right CTPDF Model
Three factors decide which CTPDF model fits your operation:
- Feed size — compare your run-of-mine lump size with the “Feed size (mm)” column: CTPDF1616, CTPDF2016 and CTPDF2416 accept ≤700 mm, while CTPDF2624 accepts ≤1200 mm.
- Required output — match your target tonnage against the “Capacity (t/h)” column: CTPDF1616 covers 250–300 t/h, CTPDF2018 covers 450–600 t/h, and CTPDF2624 covers 1500–2000 t/h.
- Installed power — motor power ranges from 250 kW on CTPDF1616 to 1400 kW on CTPDF2624, with speeds of 420 rpm on the ≤700 mm models and 350 rpm on the larger ones; confirm the site power supply.
Since a single stage handles the whole reduction, check that the feed size limit and the capacity of your chosen model match both ends of the process.
Operation & Maintenance Tips
- The hammers are the main wear part — keep adequate spares and inspect them at the intervals set for the material being crushed.
- Run the machine at the speed listed for the model (420 rpm or 350 rpm) so the product size and throughput stay as specified.
- Feed material within the listed feed size limit; oversize lumps load the chamber and affect both product size and capacity; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.
CTPDF Single Stage Heavy Hammer Crusher FAQ
Which CTPDF model do I need for about 400 t/h?
According to the “Capacity (t/h)” column, CTPDF2016 (300–400 t/h) and CTPDF2416 (350–500 t/h) both cover 400 t/h. The actual output depends on the feed material and its hardness.
What is the maximum feed size?
The “Feed size (mm)” column lists ≤700 mm for CTPDF1616, CTPDF2016 and CTPDF2416, then ≤800, ≤900, ≤1000, ≤1100 and ≤1200 mm as the models grow; CTPDF2624 takes ≤1200 mm.
Why choose a single-stage crusher?
It reduces large raw stone to the required size in one stage, which simplifies the process flow and keeps investment and operating cost low.
How often do the hammers need replacing?
The hammers are wear parts made of wear-resistant material; the interval depends on the material being crushed, so keep adequate spares on site. Chentai’s after-sales service performs an initial inspection 3–6 months after commissioning.
Product Gallery
Product photos of CTPDF Single Stage Heavy Hammer Crusher from our catalogue.

Other Models in the Same Series
Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.
CTJCCrushing EquipmentJaw Crusher
Jaw Crusher
The CTJC jaw crusher is a new generation, high efficiency coarse crushing machine developed by Chentai Equipment by absorbing advanced technology from…
- High output
- Large crushing ratio
- Low wear
CTCS/CTCH Single Cylinder Hydraulic Cone Crusher
Single Cylinder Hydraulic Cone Crusher
The single cylinder hydraulic cone crusher is the latest generation machine developed by Chentai Equipment by absorbing advanced technology from China…
- Efficient crushing
- Smart control
- Multiple cavity options
Multi-Cylinder Hydraulic Cone Crusher
Multi-Cylinder Hydraulic Cone Crusher
The multi-cylinder hydraulic cone crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, is built on the prin…
- Powerful crushing
- Precise control
- Flexible adjustment
CTPFICrushing EquipmentImpact Crusher
Impact Crusher
The impact crusher is a high efficiency crushing unit developed by Chentai Equipment on the basis of leading crushing technology from China and abroad…
- Impact crushing
- Sound structure
- Easy adjustment
High Pressure Roller Mill
High Pressure Roller Mill
The hydraulic system manufactured by Chentai Equipment applies the concept of “constant roll gap control within a defined pressure range”, which reduc…
- More efficient and reliable
CTNQCrushing EquipmentHydraulic Double Roller Crusher
Hydraulic Double Roller Crusher
The CTNQ series fully hydraulic, internal drive intelligent double roller crushers developed by Chentai Equipment have been refined over years of rese…
- Patented internal drive
- Leading pressure control
- Wide applications
CTSCCrushing EquipmentToothed Roller Crusher
Toothed Roller Crusher
The toothed roller crusher developed by Chentai Equipment is a new, highly efficient and energy saving machine of domestic invention, and the only hol…
- Screening and crushing
- Precise particle size
- Durable and serviceable
CTVSCrushing EquipmentVertical Shaft Impact Crusher
Vertical Shaft Impact Crusher
The CTVS series vertical shaft impact crushers manufactured by Chentai Equipment combine a unique rotor, wear resistant materials and an optimized str…
- Multiple rotor options
- High crushing ratio
- Low consumable wear






