High Pressure Roller Mill CTKG: More efficient and reliable

Crushing Equipment · More efficient and reliable · High output

CTKG High Pressure Roller Mill

The hydraulic system manufactured by Chentai Equipment applies the concept of “constant roll gap control within a defined pressure range”, which reduces to the greatest extent the trip stops caused by out-of-tolerance roll gap differences and makes the mill more efficient and reliable. The hydraulic system works together with the automatic control system to control the left and right gap deviation between the two rollers and to correct it automatically.

CTKG

CTKG · Selection & Quotation

Tell us the material hardness, feed size and target output, and Chentai Equipment engineers will match the machine to the complete line process and provide the selection parameters and quotation.

Mining companies served 200+, product exports 20+ countries and regions, granted technology patents 90+ patents.

Three Key Selection Factors

  • More efficient and reliable
Max feed size30-50 mm
Capacity210-2140 t/h
Power250-2000 kW
Category:

The hydraulic system manufactured by Chentai Equipment applies the concept of “constant roll gap control within a defined pressure range”, which reduces to the greatest extent the trip stops caused by out-of-tolerance roll gap differences and makes the mill more efficient and reliable. The hydraulic system works together with the automatic control system to control the left and right gap deviation between the two rollers and to correct it automatically.

Overview

The CTKG high pressure roller mill uses a hydraulic system built around constant roll gap control within a set pressure range, which avoids trips and unplanned shutdowns caused by excessive differences between the two roller gaps. The hydraulic system and the automatic control system work together to detect the left and right gap deviation and correct it automatically, keeping the rollers aligned while the machine is under load.

Working Principle

Two motors drive two pressure rollers rotating in opposite directions through a reducer and universal coupling. Material is pulled into the gap between the rollers by gravity and by friction between the rollers and the material, and is crushed under the action of the liquid spring (cylinder and accumulator). The crushed material (cake) is sent to dispersing and grading equipment by conveyor; after dispersing and classification, material smaller than the target particle size goes to the downstream grinding system, while coarse particles are returned to the roller press for re-extrusion.

Product Features

  • Torque support — A stable torque support device keeps the roller mill running smoothly under load.
  • Centralized lubrication and cooling — Centralized lubrication of the main bearings combined with a water cooling system supports bearing life and stable operation.
  • Automated control — A PLC control system provides detection and automatic control, with on-site or remote switching, one-button start and stop, and manual or automatic modes.

Basic Parameter Table

MODEL · CTKG
Series Model Roller diameter (mm) Roller width (mm) Capacity (t/h) Feed size (mm) Power (kW)
120 CTKG250 1200 500 210-250 ≤30 250*2
CTKG400 1200 800 330-400 ≤30 400*2
CTKG500 1400 700 390-460 ≤35 500*2
140 CTKG560 1400 800 420-500 ≤35 560*2
CTKG630 1400 1000 550-620 ≤35 630*2
150 CTKG710 1500 1000 660-790 ≤50 710*2
160 CTKG900 1600 1200 900-1000 ≤50 900*2
CTKG1120 1600 1400 950-1100 ≤50 1120*2
180 CTKG1600 1800 1600 1500-1750 ≤50 1600*2
200 CTKG2000 2000 1800 1820-2140 ≤50 2000*2
Note
  1. * The above selection parameters are for reference only. Specific selection parameters should be based on test screening data and provided after the screening process plan is designed!
Need a quotation for this model?Send us the material hardness, feed size and target capacity, and we will propose the model and a quotation.

or WeChat chentai202605 · +86-570-8885527

Applications

The CTKG high pressure roller mill is used where material must be pressed into a cake before grinding or where the feed needs to be reduced ahead of a downstream system. Typical duties include:

  • Pressing of material with a feed size up to 30–50 mm, depending on model
  • Pre-grinding ahead of a downstream grinding system
  • Granulating duties where the cake is dispersed and classified before further processing
  • Lines where coarse particles are returned to the roller press for re-extrusion

The mill is normally installed with a feed bin and conveyor above it and dispersing and grading equipment downstream: crushed cake leaves on the conveyor, fine material passes to the next grinding stage, and coarse material loops back to the rollers. Two motors and a PLC control cabinet form the drive and control package for the machine.

How to Choose the Right CTKG Model

Three factors decide which CTKG model fits your operation:

  1. Feed size — compare your feed size with the “Feed size (mm)” column: CTKG250, CTKG400 and CTKG560 take up to 30–35 mm, while the larger machines such as CTKG900 to CTKG2000 are listed at up to 50 mm.
  2. Required output — match your target tonnage against the “Capacity (t/h)” column: CTKG250 covers 210–250 t/h, CTKG630 covers 550–620 t/h, and CTKG2000 covers 1820–2140 t/h.
  3. Roller dimensions and power — roller diameter runs from 1200 mm (CTKG250) to 2000 mm (CTKG2000) and roller width from 500 mm to 1800 mm; installed power is quoted per roller, from 250*2 kW up to 2000*2 kW, so check the site supply.

The series is grouped by roller diameter series (120, 140, 150, 160, 180 and 200). Tell us your feed size and required throughput and we will confirm the model and roller configuration.

Operation & Maintenance Tips

  • Monitor the left and right roller gap difference — the hydraulic and control systems correct deviation automatically, but persistent deviation should be investigated before it causes a shutdown.
  • Keep the main bearing centralized lubrication and the water cooling system working; both are there to support bearing life and stable running.
  • Use the PLC control modes as required: local or remote control, one-button start and stop, manual or automatic — confirm the selected mode before handover; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.

CTKG High Pressure Roller Mill FAQ

Which CTKG model do I need for about 500 t/h?

According to the “Capacity (t/h)” column, CTKG560 (420–500 t/h) and CTKG630 (550–620 t/h) sit around that figure, with CTKG500 (390–460 t/h) as the model below. Actual output depends on feed material and operating conditions.

What feed size can the roller mill accept?

The “Feed size (mm)” column lists up to 30 mm for the smaller machines and up to 50 mm for the larger ones. Material above that size should be reduced before feeding.

What happens to the material after it passes through the rollers?

It leaves as a cake and is sent to dispersing and grading equipment. Material finer than the target size goes to the next grinding system, and coarse particles are returned to the roller press for re-extrusion.

How is the roller gap kept even?

The hydraulic system works on a constant roll gap control principle within a set pressure range, and the automatic control system detects and corrects the deviation between the left and right gaps.

PRODUCT GALLERY

Product Gallery

Product photos of CTKG High Pressure Roller Mill from our catalogue.

CTKG High Pressure Roller Mill
CTKG High Pressure Roller Mill
RELATED MODELS

Other Models in the Same Series

Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.

CTJC Jaw CrusherCTJCCrushing Equipment

Jaw Crusher

Jaw Crusher

The CTJC jaw crusher is a new generation, high efficiency coarse crushing machine developed by Chentai Equipment by absorbing advanced technology from…

  • High output
  • Large crushing ratio
  • Low wear
View Parameters
CTCS/CTCH Single Cylinder Hydraulic Cone CrusherCTCS / CTCHCrushing Equipment

CTCS/CTCH Single Cylinder Hydraulic Cone Crusher

Single Cylinder Hydraulic Cone Crusher

The single cylinder hydraulic cone crusher is the latest generation machine developed by Chentai Equipment by absorbing advanced technology from China…

  • Efficient crushing
  • Smart control
  • Multiple cavity options
View Parameters
CTHP Multi-Cylinder Hydraulic Cone CrusherCTHPCrushing Equipment

Multi-Cylinder Hydraulic Cone Crusher

Multi-Cylinder Hydraulic Cone Crusher

The multi-cylinder hydraulic cone crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, is built on the prin…

  • Powerful crushing
  • Precise control
  • Flexible adjustment
View Parameters
CTPDF Single Stage Heavy Hammer CrusherCTPDFCrushing Equipment

Single Stage Heavy Hammer Crusher

Single Stage Heavy Hammer Crusher

The single stage heavy hammer crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, integrates coarse crushi…

  • High output
  • Single-pass shaping
  • Adjustable output size
View Parameters
CTPFI Impact CrusherCTPFICrushing Equipment

Impact Crusher

Impact Crusher

The impact crusher is a high efficiency crushing unit developed by Chentai Equipment on the basis of leading crushing technology from China and abroad…

  • Impact crushing
  • Sound structure
  • Easy adjustment
View Parameters
CTNQ Hydraulic Double Roller CrusherCTNQCrushing Equipment

Hydraulic Double Roller Crusher

Hydraulic Double Roller Crusher

The CTNQ series fully hydraulic, internal drive intelligent double roller crushers developed by Chentai Equipment have been refined over years of rese…

  • Patented internal drive
  • Leading pressure control
  • Wide applications
View Parameters
CTSC Toothed Roller CrusherCTSCCrushing Equipment

Toothed Roller Crusher

Toothed Roller Crusher

The toothed roller crusher developed by Chentai Equipment is a new, highly efficient and energy saving machine of domestic invention, and the only hol…

  • Screening and crushing
  • Precise particle size
  • Durable and serviceable
View Parameters
CTVS Vertical Shaft Impact CrusherCTVSCrushing Equipment

Vertical Shaft Impact Crusher

Vertical Shaft Impact Crusher

The CTVS series vertical shaft impact crushers manufactured by Chentai Equipment combine a unique rotor, wear resistant materials and an optimized str…

  • Multiple rotor options
  • High crushing ratio
  • Low consumable wear
View Parameters
SELECTION SUPPORT

Not sure which model to choose?

Tell us the material hardness, feed size, target output and finished product specification, and Chentai engineers will match the complete line process solution and provide selection parameters and a quotation.

Consultation Hotline

+86 133 6202 3713

Zhejiang Chentai Intelligent Equipment Co., Ltd.

Get a Selection Proposal

Quality Builds the Enterprise Service Reaches Far

Vision Building a Benchmark for Industry Quality Create industry quality benchmarks

Mission Committed to green development of mines and continued success for customers Committed to the green development of mines and continuous customer success

We Look Forward to Working With You

The company is committed to continuous product improvement. If appearance details change, please refer to the actual product.

+86 133 6202 3713 +86-570-8885527 equipmentchentai@gmail.com WhatsApp +86 133 6202 3713