Jaw Crusher CTJC: High output

Crushing Equipment · High output · Large crushing ratio

CTJC Jaw Crusher

The CTJC jaw crusher is a new generation, high efficiency coarse crushing machine developed by Chentai Equipment by absorbing advanced technology from China and abroad and precisely fitting the complex working conditions of the domestic sand and gravel industry. It adopts European design and a deep chamber “V” crushing chamber, suits mining, building materials and road construction, and crushes ore and rock with a compressive strength of ≤ 300MPa.

CTJC

CTJC · Selection & Quotation

Tell us the material hardness, feed size and target output, and Chentai Equipment engineers will match the machine to the complete line process and provide the selection parameters and quotation.

Mining companies served 200+, product exports 20+ countries and regions, granted technology patents 90+ patents.

Three Key Selection Factors

  • High output
  • Large crushing ratio
  • Low wear
  • High safety
Max feed size408-1200 mm
Capacity80-1435 t/h
Power75-400 kW
Category:

The CTJC jaw crusher is a new generation, high efficiency coarse crushing machine developed by Chentai Equipment by absorbing advanced technology from China and abroad and precisely fitting the complex working conditions of the domestic sand and gravel industry. It adopts European design and a deep chamber “V” crushing chamber, suits mining, building materials and road construction, and crushes ore and rock with a compressive strength of ≤ 300MPa.

Overview

The CTJC series jaw crusher is a coarse crushing machine used in mining, building materials and road construction to crush ores and rocks with a compressive strength of up to 300 MPa. Its deep “V”-shaped crushing chamber draws material in progressively, so feed is grabbed at the top and reduced as it moves down toward the discharge opening.

Product Features

  • Deep V-shaped chamber with a large feed opening
  • Integrated cast steel frame
  • Shim-adjusted discharge opening, easy for maintenance
  • High-performance bearings with strong load capacity

Basic Parameters

MODEL · CTJC
Model Feed Opening Size (mm) Max feed size (mm) Feed Opening Width (Mm) Feed open depth (mm) Power (KW) (kw) Speed (rpm) Capacity (t/h)
CTJC80 800*510 408 800 510 75 350 80-335
CTJC96 930*580 464 930 580 90 330 105-390
CTJC106 1060*700 560 1060 700 110 280 150-500
CTJC110 1100*850 680 1100 850 160 230 160-555
CTJC116 1150*800 640 1150 800 132 260 165-520
CTJC120 1200*870 696 1200 870 160 230 175-540
CTJC125 1250*950 760 1250 950 160 220 245-755
CTJC130 1300*1000 800 1300 1000 160 220 270-831
CTJC140 1400*1070 856 1400 1070 200 220 325-840
CTJC150 1400*1200 960 1400 1200 200 220 340-880
CTJC160 1600*1200 960 1600 1200 250 220 430-1145
CTJC200 2000*1500 1200 2000 1500 400 200 630-1435
Note
  1. This set of data was collected based on local operating conditions. Depending on the application and production requirements, production is typically carried out using a small, tight-clearance discharge opening. Please contact us for information regarding the settings and performance of the crusher in specific applications.
  2. The data above indicates the crusher's throughput. These values are based on an average specific gravity of 2.7 t/m³, with feed material entering the crushing chamber smoothly and without bridging or jamming.
  3. The method for determining the closed-side setting discharge opening of the crusher varies depending on the selected jaw plate tooth profile. This will affect the crusher's capacity and product particle size.
Need a quotation for this model?Send us the material hardness, feed size and target capacity, and we will propose the model and a quotation.

or WeChat chentai202605 · +86-570-8885527

Detailed Parameter List

Model size (mm)
0-90 0-105 0-120 0-136 0-150 0-185 0-225 0-260 0-300 0-340 0-375 0-410 0-450
CTJC80 80-110 95-135 110-150 125-175 140-190 175-245 210-290 245-335
CTJC96 105-135 125-155 140-180 160-200 175-225 220-280 265-335 310-390
CTJC106 150-185 165-215 190-235 205-265 255-325 305-385 355-450 395-500
CTJC110 160-220 175-245 190-275 215-295 260-360 310-430 350-490 405-555
CTJC116 165-205 180-235 205-255 225-285 270-345 320-405 370-465 410-520
CTJC120 175-240 195-270 210-305 235-325 285-395 340-475 385-540
CTJC125 245-335 295-405 345-475 395-545 445-615 495-685 545-755
CTJC130 270-369 325-446 360-523 435-600 490-677 545-754 600-831
CTJC140 325-445 380-530 435-605 495-685 550-760 610-840
CTJC150 340-470 400-555 460-635 520-720 580-800 640-880
CTJC160 430-610 495-695 560-790 625-880 685-965 745-1055 815-1145
CTJC200 630-890 710-1000 785-1105 865-1215 940-1320 1015-1435

Note:
1. This set of data was collected based on local operating conditions. Depending on the application and production requirements, production is typically carried out using a small, tight-clearance discharge opening. Please contact us for information regarding the settings and performance of the crusher in specific applications.
2. The data above indicates the crusher’s throughput. These values are based on an average specific gravity of 2.7 t/m3, with feed material entering the crushing chamber smoothly and without bridging or jamming. The lower value is used when the feed material excludes fines smaller than the discharge opening, while the higher value is used when the feed contains fines. Throughput may vary depending on the feeding method and material properties, such as particle size distribution, moisture and clay content, bulk density, and crushability.
3. The method for determining the closed-side setting discharge opening of the crusher varies depending on the selected jaw plate tooth profile. This will affect the crusher’s capacity and product particle size.

Gradation Curves

CTJC Gradation Curves

Applications

The CTJC jaw crusher is normally the first crushing stage in a plant, reducing run-of-mine material to a size that secondary crushers can handle. Typical applications include:

  • Quarry and aggregate production
  • Primary crushing of metal ores in mining
  • Construction stone and construction waste recycling
  • Road, railway and hydropower projects

It processes ores and rock with compressive strength up to 300 MPa, and is commonly combined with a vibrating feeder and a cone or impact crusher to form a complete crushing line.

How to Choose the Right CTJC Model

Three factors decide which CTJC model fits your operation:

  1. Feed size — compare your run-of-mine lump size with the “Max feed size” column: CTJC80 accepts up to 408 mm, CTJC106 up to 560 mm, and CTJC200 up to 1200 mm.
  2. Required output — match your target tonnage against the “Capacity” column of the Basic Parameters table. The series covers 80–1435 t/h depending on model and discharge setting.
  3. Finished product size — a finer product requires a smaller discharge opening, which lowers capacity. Use the Detailed Parameter List to check the expected output at your target size before deciding.

Motor power ranges from 75 kW to 400 kW across the series, so confirm your site power supply as well. If you are unsure, send us your material type, feed size and required output and we will help you size the line.

Operation & Maintenance Tips

  • Follow the daily-check, weekly-inspection and monthly-maintenance routine described in the operation manual.
  • Jaw plates are wear parts: typical service life is 6–12 months depending on material abrasiveness and operating conditions — keep adequate spares.
  • Chentai after-sales service performs an initial inspection 3–6 months after commissioning.

CTJC Jaw Crusher FAQ

What is the maximum feed size of the CTJC jaw crusher?

It depends on the model: 408 mm for CTJC80, 560 mm for CTJC106, up to 1200 mm for CTJC200. The complete list is in the Basic Parameters table above.

How often should the jaw plates be replaced?

Typically every 6–12 months, depending on material abrasiveness and operating conditions. Chentai’s after-sales service performs an initial inspection 3–6 months after commissioning.

Which model do I need for about 300 t/h?

According to the Capacity column, CTJC106 (150–500 t/h), CTJC110 (160–555 t/h) and larger models can cover 300 t/h; the actual output depends on the discharge setting and material properties.

Can the discharge opening be adjusted?

Yes. The discharge opening is shim-adjusted for easy maintenance, and the Detailed Parameter List above shows the expected output at different discharge settings.

PRODUCT GALLERY

Product Gallery

Product photos of CTJC Jaw Crusher from our catalogue.

CTJC Jaw Crusher
CTJC Jaw Crusher
CTJC Jaw Crusher
CTJC Jaw Crusher
RELATED MODELS

Other Models in the Same Series

Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.

CTCS/CTCH Single Cylinder Hydraulic Cone CrusherCTCS / CTCHCrushing Equipment

CTCS/CTCH Single Cylinder Hydraulic Cone Crusher

Single Cylinder Hydraulic Cone Crusher

The single cylinder hydraulic cone crusher is the latest generation machine developed by Chentai Equipment by absorbing advanced technology from China…

  • Efficient crushing
  • Smart control
  • Multiple cavity options
View Parameters
CTHP Multi-Cylinder Hydraulic Cone CrusherCTHPCrushing Equipment

Multi-Cylinder Hydraulic Cone Crusher

Multi-Cylinder Hydraulic Cone Crusher

The multi-cylinder hydraulic cone crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, is built on the prin…

  • Powerful crushing
  • Precise control
  • Flexible adjustment
View Parameters
CTPDF Single Stage Heavy Hammer CrusherCTPDFCrushing Equipment

Single Stage Heavy Hammer Crusher

Single Stage Heavy Hammer Crusher

The single stage heavy hammer crusher manufactured by Chentai Equipment, combining advanced technology from China and abroad, integrates coarse crushi…

  • High output
  • Single-pass shaping
  • Adjustable output size
View Parameters
CTPFI Impact CrusherCTPFICrushing Equipment

Impact Crusher

Impact Crusher

The impact crusher is a high efficiency crushing unit developed by Chentai Equipment on the basis of leading crushing technology from China and abroad…

  • Impact crushing
  • Sound structure
  • Easy adjustment
View Parameters
CTKG High Pressure Roller MillCTKGCrushing Equipment

High Pressure Roller Mill

High Pressure Roller Mill

The hydraulic system manufactured by Chentai Equipment applies the concept of “constant roll gap control within a defined pressure range”, which reduc…

  • More efficient and reliable
View Parameters
CTNQ Hydraulic Double Roller CrusherCTNQCrushing Equipment

Hydraulic Double Roller Crusher

Hydraulic Double Roller Crusher

The CTNQ series fully hydraulic, internal drive intelligent double roller crushers developed by Chentai Equipment have been refined over years of rese…

  • Patented internal drive
  • Leading pressure control
  • Wide applications
View Parameters
CTSC Toothed Roller CrusherCTSCCrushing Equipment

Toothed Roller Crusher

Toothed Roller Crusher

The toothed roller crusher developed by Chentai Equipment is a new, highly efficient and energy saving machine of domestic invention, and the only hol…

  • Screening and crushing
  • Precise particle size
  • Durable and serviceable
View Parameters
CTVS Vertical Shaft Impact CrusherCTVSCrushing Equipment

Vertical Shaft Impact Crusher

Vertical Shaft Impact Crusher

The CTVS series vertical shaft impact crushers manufactured by Chentai Equipment combine a unique rotor, wear resistant materials and an optimized str…

  • Multiple rotor options
  • High crushing ratio
  • Low consumable wear
View Parameters
SELECTION SUPPORT

Not sure which model to choose?

Tell us the material hardness, feed size, target output and finished product specification, and Chentai engineers will match the complete line process solution and provide selection parameters and a quotation.

Consultation Hotline

+86 133 6202 3713

Zhejiang Chentai Intelligent Equipment Co., Ltd.

Get a Selection Proposal

Quality Builds the Enterprise Service Reaches Far

Vision Building a Benchmark for Industry Quality Create industry quality benchmarks

Mission Committed to green development of mines and continued success for customers Committed to the green development of mines and continuous customer success

We Look Forward to Working With You

The company is committed to continuous product improvement. If appearance details change, please refer to the actual product.

+86 133 6202 3713 +86-570-8885527 equipmentchentai@gmail.com WhatsApp +86 133 6202 3713