The grizzly feeder produced and optimized by Chentai Equipment has a built-in pre-screening function and is widely used in production lines for mining, building materials and other industries. It feeds lump and granular material such as mined ore, rock, river cobbles and construction waste. The trough is fitted with a single layer of grizzly bars, which performs simple pre-screening and effectively removes fines and impurities from the feed.
Overview
The CTGF grizzly feeder is a vibrating feeder with a built-in pre-screening function, used to feed bulk and granular materials such as mined ores, rock, river pebbles and construction waste in mining and building materials lines. A single-deck grizzly bar section is fitted in the feeder trough, so fines and impurities are removed from the raw feed before it reaches the crusher.
Working Principle
The feeder consists of a feeding trough, an exciter, a spring support and a transmission device. The motor drives the driving shaft through the V-belt, and a gear pair on the driving shaft turns the driven shaft in the opposite direction; the resulting vibration of the trough moves the material continuously forward to the discharge.
Product Features
- Double eccentric shaft vibrator — Two eccentric shafts driven through a gear pair give a strong, consistent vibration to the trough.
- Built-in pre-screening — The grizzly bar section removes fines and impurities from the feed before the crushing stage.
- Simple structure — Few components make the feeder straightforward to install and adapt to different lines.
- Quiet operation — The machine runs at low noise in normal operation.
- Precision components — Parts are machined to digital-processing precision, and original spare parts are available.
Basic Parameter Table
MODEL · CTGF| Model | Trough size (mm) | Max feed size (mm) | Capacity (t/h) | Speed (r/min) | Power (KW) |
|---|---|---|---|---|---|
| CTGF4510 | 4500*1000 | 500 | 100-200 | 710 | 15 |
| CTGF4512 | 4500*1200 | 580 | 200-380 | 780 | 22 |
| CTGF6013 | 6000*1300 | 750 | 400-600 | 780 | 30 |
| CTGF6015 | 6000*1500 | 800 | 600-800 | 780 | 37 |
| CTGF6018 | 6000*1800 | 900 | 800-1000 | 780 | 45 |
| CTGF6020 | 6000*2000 | 1000 | 1000-1500 | 780 | 55 |
or WeChat chentai202605 · +86-570-8885527
Applications
The CTGF grizzly feeder both feeds and pre-screens: it meters material from the bin and lets fines bypass the crusher through the grizzly bar section. Typical duties include:
- Feeding mined ores to a primary crusher with pre-screening of fines
- Feeding rock and river pebbles in aggregate lines
- Feeding construction waste to a recycling crusher
- Removing fines and impurities from raw feed before the crushing stage
The feeder is installed under the receiving bin with the grizzly section ahead of the crusher, so fine material that does not need crushing is separated before it enters the chamber. Conveyor and screen equipment downstream handle the separated fractions and the crushed product.
How to Choose the Right CTGF Model
Three factors decide which CTGF model fits your operation:
- Feed size — compare your lump size with the “Max feed size (mm)” column: CTGF4510 accepts 500 mm and CTGF6020 accepts 1000 mm.
- Required output — match your tonnage against the “Capacity (t/h)” column: CTGF4510 covers 100–200 t/h, CTGF6015 covers 600–800 t/h, and CTGF6020 covers 1000–1500 t/h.
- Trough size and power — trough size runs from 4500*1000 mm to 6000*2000 mm, with motor power from 15 kW to 55 kW; make sure the trough width matches the bin outlet and the crusher feed opening.
Working speed is 710 r/min on the smallest model and 780 r/min on the larger ones. Tell us your feed size and required throughput and we will confirm the model.
Operation & Maintenance Tips
- Keep the grizzly bar section clear so fines can pass through; buildup there reduces the pre-screening effect and sends fines into the crusher.
- Check the V-belt drive and the exciter gear pair for wear and alignment — the gear pair sets the counter-rotation that drives the vibration.
- Use original spare parts when replacing worn components so the digital-machined fits are maintained; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.
CTGF Grizzly Feeder FAQ
Which CTGF model do I need for about 600 t/h?
According to the “Capacity (t/h)” column, CTGF6013 (400–600 t/h) and CTGF6015 (600–800 t/h) both cover 600 t/h. The actual output depends on the material and how much of it passes through the grizzly section.
What is the largest feed size?
The “Max feed size (mm)” column runs from 500 mm on CTGF4510 to 1000 mm on CTGF6020; the intermediate models list 580, 750, 800 and 900 mm.
What does the grizzly bar section do?
It is a single-deck grizzly bar section built into the feeder trough. It carries out simple pre-screening of the feed, removing fines and impurities before the material enters the crusher.
How is the material moved along the feeder?
The motor drives the driving shaft through the V-belt and a gear pair turns the driven shaft in the opposite direction; the resulting vibration of the trough conveys the material continuously to the discharge.
Product Gallery
Product photos of CTGF Grizzly Feeder from our catalogue.



Other Models in the Same Series
Other optional models for the same process step; compare the basic parameter table and the selection notes, then view the details directly.
Heavy Duty Apron Feeder
Heavy Duty Apron Feeder
The heavy duty apron feeder is a heavy, low speed and rugged conveying unit developed by Chentai Equipment by drawing on and applying modern advanced technology.
- Frequency direct drive
- Easy maintenance
- Reliable chain drive
Pan Feeder
Pan Feeder
The plate feeder series independently produced and optimized by Chentai Equipment are widely used in the mining, metallurgy, coal, building materials,…
- Vibratory feeding
- Good arch-breaking performance
- Grain and other industries



