To assess the performance of a sand washer, look at three indicators: washing cleanliness (residual mud content in finished sand), fine sand loss rate (how much washed sand is lost as fine powder), and circulating water reuse rate (water consumption and discharge volume). Chentai’s sand-washing equipment follows the approach of “multi-stage washing, controlled flow velocity and water reuse.” Below is a comparison of the capacity and power of the three series.
Parameter comparison of the three series
| Model Series | Model | Feed Size | Power | Processing Capacity |
|---|---|---|---|---|
| CTBD | Chain Bucket Sand Washer | 30 mm | — | 60–300 t/h |
| CTLX | Spiral Sand Washer | 10 mm | 15–30 kW | 60–250 t/h |
| CTLD | Wheeled Sand Washer | 10 mm | 5.5–22 kW | 20–350 t/h |
How to assess the three indicators
- Washing cleanliness: Check the mud content of the finished sand (tested according to industry standards). To meet the standards for manufactured sand, the mud content of the sand must remain within the specified limit.
- Fine sand loss rate: The sand-washing process carries away fine particles. Excessive flow velocity and improper screen configuration both increase losses; every lost unit of fine sand is a direct loss of product.
- Circulating water reuse rate: The sedimentation recovery design of the settling tank and clean water tank determines the reuse rate. A high reuse rate means lower water consumption and discharge per ton of product.
Key considerations for model selection
The higher the mud content of the material, the more washing and separation stages are required and the greater the processing-capacity margin should be. When there are strict requirements for finished-product mud content and fine sand loss, include the “target washing cleanliness” directly in the selection criteria rather than selecting solely by output.
Related Models:CTBD Chain Bucket Sand Washer、CTLX Spiral Sand Washer、CTLD Wheeled Sand Washer
Related Categories:Washing Equipment · After-Sales Service
