Heavy Duty Apron Feeder CTBW: Frequency direct drive

Feeding Equipment · Frequency direct drive · Easy maintenance

CTBW Heavy Duty Apron Feeder

The heavy duty apron feeder is a heavy, low speed and rugged conveying unit developed by Chentai Equipment by drawing on and applying modern advanced technology. It uses continuously rotating metal plates as the carrying surface, feeding material evenly and continuously from the bin to downstream equipment such as the crusher.

CTBW

CTBW · Selection & Quotation

Tell us the material hardness, feed size and target output, and Chentai Equipment engineers will match the machine to the complete line process and provide the selection parameters and quotation.

Mining companies served 200+, product exports 20+ countries and regions, granted technology patents 90+ patents.

Three Key Selection Factors

  • Frequency direct drive
  • Easy maintenance
  • Reliable chain drive
  • Impact resistant
Max feed size700-1100 mm
Capacity600-2500 t/h
PowerDetermined by working conditions
Category:

The heavy duty apron feeder is a heavy, low speed and rugged conveying unit developed by Chentai Equipment by drawing on and applying modern advanced technology. It uses continuously rotating metal plates as the carrying surface, feeding material evenly and continuously from the bin to downstream equipment such as the crusher.

Overview

The CTBW heavy duty apron feeder is a low-speed conveying machine that feeds material evenly and continuously from a storage bin to downstream equipment such as a crusher. A circularly rotating metal chain plate forms the carrying surface, so the feeder can take the impact and wear of large, sharp or high-temperature material. It is used in mining, building materials and metallurgy wherever lump material must be fed at a controlled rate.

Working Principle

The conveyor trough is connected to the traction chain and to the load-bearing mechanism. The motor and reducer drive the head sprocket, and the traction chain meshed with the sprocket pulls the loaded trough forward. The chain travels on supporting wheels, which carry the trough and the weight of the material; the whole machine sits on a frame that transmits the load to the foundation. Material is pushed from the bin above the tail into the trough and is discharged at the head opening of the cover.

Product Features

  • Frequency-controlled direct drive — A YVF2 series variable frequency motor is connected directly to a planetary gear reducer, which simplifies the structure and improves transmission efficiency.
  • Service-friendly couplings — The spindle, bearings and sprockets are fitted with expansion sleeves and demountable sleeves, avoiding keyway stress and simplifying removal during overhaul.
  • Reliable chain drive — The drive sprocket uses a detachable-bulldozer type driving wheel gear block and the chain is a crawler-type chain, which runs without frequent lubrication.
  • Impact-resistant pan — A combined roller and supporting-wheel support gives high stiffness and low running resistance, and a buffer device at the material receiving section reduces impact on the trough plate.
  • Tail tensioning — The tail tensioning device includes a spring and a sliding bearing seat, which smooths impact loads on the chain.

Basic Parameter Table

MODEL · CTBW
Model Tank width (mm) Tank length (m) Max feed size (mm) Installation angle (°) Running speed (m/s) Capacity (t/h)
CTBW1600 1600 5-20 700 0-23 0-0.25 600-1000
CTBW1800 1800 5-20 800 0-23 0-0.25 800-1200
CTBW2000 2000 5-20 900 0-23 0-0.25 1000-1500
CTBW2200 2200 5-20 1000 0-23 0-0.25 1200-1800
CTBW2400 2400 5-20 1100 0-23 0-0.25 1500-2500
Need a quotation for this model?Send us the material hardness, feed size and target capacity, and we will propose the model and a quotation.

or WeChat chentai202605 · +86-570-8885527

Applications

The CTBW apron feeder sits under a bin or stockpile and meters material into the process at a controlled rate. Typical duties include:

  • Feeding run-of-mine ore from a bin to a primary crusher
  • Handling large, sharp or hot material that would damage a belt feeder
  • Continuous feeding in mining, building materials and metallurgy plants
  • Metering material where the feed rate must be varied to suit the crusher

In a crushing line the feeder is installed below the receiving bin and ahead of the crusher, with the trough length (5–20 m) and installation angle (0–23°) set for the layout. Because running speed is adjustable from 0 to 0.25 m/s, the feed rate can be matched to the capacity of the machine downstream.

How to Choose the Right CTBW Model

Three factors decide which CTBW model fits your operation:

  1. Max feed size — compare your lump size with the “Max feed size (mm)” column: CTBW1600 accepts 700 mm, CTBW2000 accepts 900 mm, and CTBW2400 accepts 1100 mm.
  2. Required output — match your tonnage against the “Capacity (t/h)” column: CTBW1600 covers 600–1000 t/h and CTBW2400 covers 1500–2500 t/h.
  3. Trough width — tank width runs from 1600 mm to 2400 mm while tank length stays 5–20 m across the range, so choose the width that matches your bin outlet and the required tonnage.

The installation angle (0–23°) and running speed (0–0.25 m/s) are the same across the range, so the decision comes down to feed lump size, throughput and trough width.

Operation & Maintenance Tips

  • The chain does not require frequent lubrication, but keep an eye on chain tension and on the condition of the tail tensioning spring, which absorbs impact load.
  • Check the buffer device at the material receiving section and the trough plate for wear — these take the impact of the material dropped from the bin.
  • Expansion sleeve couplings on the spindle, bearings and sprockets simplify overhaul; have the correct sleeve tools available before disassembly; Chentai after-sales service performs an initial inspection 3–6 months after commissioning.

CTBW Heavy Duty Apron Feeder FAQ

Which CTBW model do I need for about 1500 t/h?

According to the “Capacity (t/h)” column, CTBW2000 (1000–1500 t/h) and CTBW2400 (1500–2500 t/h) cover 1500 t/h. Check the max feed size as well: CTBW2000 takes 900 mm and CTBW2400 takes 1100 mm.

What is the largest lump size it can take?

The “Max feed size (mm)” column lists 700 mm for CTBW1600, 800 mm for CTBW1800, 900 mm for CTBW2000, 1000 mm for CTBW2200 and 1100 mm for CTBW2400.

How is the feed rate controlled?

The feeder uses a YVF2 series variable frequency motor with a planetary gear reducer, and running speed is adjustable within 0–0.25 m/s, so the feed rate can be matched to the equipment downstream.

Why use an apron feeder instead of a belt feeder?

The metal chain plate forms the carrying surface, so the machine can take the impact and wear of large, sharp or high-temperature material; a buffer device at the receiving section further protects the trough plate.

PRODUCT GALLERY

Product Gallery

Product photos of CTBW Heavy Duty Apron Feeder from our catalogue.

CTBW Heavy Duty Apron Feeder
CTBW Heavy Duty Apron Feeder
SELECTION SUPPORT

Not sure which model to choose?

Tell us the material hardness, feed size, target output and finished product specification, and Chentai engineers will match the complete line process solution and provide selection parameters and a quotation.

Consultation Hotline

+86 133 6202 3713

Zhejiang Chentai Intelligent Equipment Co., Ltd.

Get a Selection Proposal

Quality Builds the Enterprise Service Reaches Far

Vision Building a Benchmark for Industry Quality Create industry quality benchmarks

Mission Committed to green development of mines and continued success for customers Committed to the green development of mines and continuous customer success

We Look Forward to Working With You

The company is committed to continuous product improvement. If appearance details change, please refer to the actual product.

+86 133 6202 3713 +86-570-8885527 equipmentchentai@gmail.com WhatsApp +86 133 6202 3713